BDS PM-6950

The woldwide source of the right solutions for power plants
 Home Up

 

 

Home
Up

 

 

Purpose

BDS 6950 is the product of choice when fast deactivation is required, as to prevent mutagenecies.

BDS 6950 is a high performance industrial microbiocide for use in closed recirculating water systems, cooling towers, power station circuits, wood, mold and mildew control, pulp and paper mills, oil field injection waters air washer, air conditioning and food processing systems.

BDS 6950 has extremely broad spectrum activity, controlling bacteria, fungi and yeasts without affecting product physical properties. Very low use levels make BDS 6950 one of the most cost effective solutions on the market.

BDS 6950 is very effective in controlling the typical bacteria and fungi, but also offers compatibility with papermaking chemicals and equipment, and convenient handling properties.

 

Chemical Composition

BDS 6950 is comprised of two primary active compounds, 5-chloro-2-methyl-4-isothiazolin-3- one and 2-methyl-4-isothiazolin-3-one, in a dilute aqueous solution that permit, easy and safe handling.

bulletActive Ingredients % WT/WT
bullet5-Chloro-2-methyl-4-isothiazolin-3-one 1,11%
bullet2-Methyl-4-isothiazolin-3-one 0.40%

Advantages 

bulletCompatibility

BDS 6950 Isothiazolinones are generally compatible with most components of industrial formulations.

bulletBiocidal Performance

BDS 6950 is a highly cost effective biocide preservative due to the low use levels required.
bulletRapid inhibition of macromolecular synthesis (proteins, RNA, etc.)
bulletSynergistic with halogen, not pH sensitive
bulletMinimize environmental concerns
bulletMeets FDA requirements

BDS 6950 meets the requirements of the Food and Drug Administration (FDA) for use as a slimicide in the manufacture of paper and paperboard, intended to contact food (21 CFR 175.500 and 175.320 )

.

 

Application

bulletRecommended method of addition

You can feed BDS 6950 with a metering pump at any point where uniform mixing can be attained. Use corrosion resistant equipment.

BDS 6950 can be added continuously or periodically, with adjustments in the intervals between additions and dose levels dependent on visual inspections, microbiological analyses, and/or experienced observations of a water treatment representative.

bulletTreatment levels

For closed systems a normal feeding of a 25 ppm shock once to twice a month is normally sufficient.

For cooling towers and air washers shock of 25 ppm twice a week is recommended.

For the control of bacterial, fungal, and yeast growth in pulp, paper, and paperboard mills, add BDS 6950 at the rates of 50 to 150 gr / tn of dry paper.

 

Typical Properties

 

bulletAppearance Clear Liquid
bulletpH 1.5 - 3.5
bulletOdor Mild

 

Safety

Avoid breathing vapours. Wear suitable protective gloves and safety goggles. In case of contact immediately flush with water. After eye contact seek medical advice.

Small spills can be flushed with water. Large spills should be collected for disposal.

Read carefully the Material Safety Data Sheet (MSDS) before use.

 

Transport classifications

A.D.R. : 8 – 40b

IMDG : 8147

U.N.nr. : 3265 – II

 

 

Labeling

Symbol : C CORROSIVE

R-phrases : 43 34

S-phrases : 26, 28, 36/37/39, 45

 

Packaging

BDS® PM-6950 is packed in 30 kg jerrycans and 240 kg PE drums.

 

 

The worldwide source of the right solutions for power plants

Home Up