BDS^® PM-6950 has extremely broad spectrum activity, controlling bacteria, fungi and yeasts without affecting product physical properties. Very low use levels make BDS^® PM-6950 one of the most cost effective solutions on the market.

BDS^® PM-6950 is very effective in controlling the typical bacteria and fungi, but also offers compatibility with papermaking chemicals and equipment, and convenient handling properties.

• Active Ingredients 

• 5-Chloro-2-methyl-4-isothiazolin-3-one 

• 2-Methyl-4-isothiazolin-3-one 

• Rapid inhibition of macromolecular synthesis (proteins, RNA, etc.)
• Synergistic with halogen, not pH sensitive
• Minimize environmental concerns
• Meets FDA requirements

BDS^® PM-6950 meets the requirements of the Food and Drug Administration (FDA) for use as a slimicide in the manufacture of paper and paperboard, intended to contact food (21 CFR 175.500 and 175.320 )

Application

You can feed BDS^® PM-6950 with a metering pump at any point where uniform mixing can be attained. Use corrosion resistant equipment.

BDS^® PM-6652 can be added continuously or periodically, with adjustments in the intervals between additions and dose levels dependent on visual inspections, microbiological analyses, and/or experienced observations of a water treatment representative.

• Treatment levels

For the control of bacterial, fungal, and yeast growth in pulp, paper, and paperboard mills, add BDS^® PM-6950 at the rates of 50 to 250 gr / tn of dry paper.

• Appearance Clear Liquid
• pH 1.5 - 3.5
• Odor Mild

Avoid breathing vapours. Wear suitable protective gloves and safety goggles. In case of contact immediately flush with water. After eye contact seek medical advice.

Small spills can be flushed with water. Large spills should be collected for disposal.

Read carefully the Material Safety Data Sheet (MSDS) before use.