The woldwide source of the right solutions for power plants

 

 

 

 

Use

WSC® 8140 deposit and corrosion inhibitor is recommended for the control of corrosion and deposition in closed recirculating cooling water systems.

The product is formulated to control deposition of hardness salts and minimize corrosion of mild steel and copper alloys.

WSC® 8140 is suitable in hard alkaline cooling waters, here the use of traditional inhibitors such as phosphates, phosphate esters or chromate is not acceptable

Features

WSC® 8140 is a clear liquid combination nitrite-borate-azole corrosion inhibitor (containing no chromate or phosphate) designed to control pitting and galvanic action in closed recirculating hot and chilled water systems.

The non-chromate, non-phosphate, non-toxic nature of WSC® 8140 makes it possible for plants to treat their hot and chilled water systems without the danger of creating pollution problems.

The effluent (or blowdown) from a system treated with WSC® 8140 can be released into any river, stream or stabilization lagoon without the fear of increasing toxicity.

WSC® 8140 contains also organophosphorous compounds and chelant, so can easily control deposition of hardness salts and iron or copper oxides.

Advantages
bulletSafe and easy to handle and use.
bulletControls deposition and corrosion of both ferrous and non-ferrous metals.
bulletCompatible with alcohol- and glycol-based antifreezes.
bulletColorless, non-staining

Appearance

bulletAppearance and Color: Pale yellow liquid
bulletSpecific Gravity: 1.09
bulletpH: > 12.0

Solubility in Water: Miscible

bullet% volatile by volume @ 21C (70F): Nil
bulletBoiling Point: 214 degrees F
bulletMelting Point: NDA

These data are to be seen as typical values and

should not be considered as specifications.

Feeding

Normally, the treatment should be used in sufficient quantity to maintain a product residual of 2500-4000 ppm. An initial dosage of 9 0/oo of water in the system, is required.

All statements, information and data presented herein are believed to be accurate and reliale but are not to be taken as a guarantee, express warranty or implied warranty of merchantability of fitness for a particular purpose, or representation , express or impl ied , for which seller assumes legal responsibility, and they are offered solely for your consideration , investigation and verification.

Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. .

The worldwide source of the right solutions for power plants