A liquid, single-feed bromine biocide, used in combination to the chlorination, as to give to chlorine the power of chlorobromination.

It is also used to control biofilm deposits in pumps, pipes, heat exchangers and filters associated with industrial water treatment systems.

This powerful broad spectrum biocide effectively and quickly controls bacteria, algae and fungi through NaOBr action.

NaOBr is a powerful broad spectrum biocide recommended for desinfection of recirculating and once-through cooling systems, food processing equipment (pasteurisers, sterilisers or retorts), air washers and other industrial water systems.

NaOBr remains active in alkaline waters (pH = 7,5-9,5) resulting in more efficient desinfections than when using chlorine based biocides.

The product dosage rate will depend on system design, water characteristics and operational parameters. In most of the application a residual in 0.2 – 0.5 ppm of residual free available halogen is sufficient to keep the control of the system.

For additional information, please contact your local Water Services Ltd representative.

Wear suitable protective gloves and safety goggles. In case of contact immediately flush with plenty of water. After eye contact seek medical advice.

In case of spillage, absorb with sand or other absorbent material and sweep up. Then flush the area with water.

Before use review the Material Safety Data Sheet for additional information.

Freely soluble in water.